App update checking

We can hope. Anyone know who s doing the coding? Weber internal or have they outsourced it. Just curious.
 
We can hope. Anyone know who s doing the coding? Weber internal or have they outsourced it. Just curious.
I know June helped develop a lot of the software so I would assume they did a lot of the coding. I would sure love to get some confirmation and information on this myself!
 
Anyone had experience with the June oven?
I have not at all. My first experience with June is with our Smokfire's. If they had ANYTHING to do with the APP or the algorithms that tie the cooker the software I am totally not impressed. I wanted to buy a June Oven before I bought my Smoke Fire but I do not want to anymore at this time based on the smokefire software and App.
 
One thing I’ve noticed at least on my iPhone 11 Pro the Connect app drains my battery faster than normal.
 
Yesterday when I started my WSF I noticed the controller display showing a series of blinking lights near the bottom and took a little longer to start up. I saw on other websites that this was a firmware update. The sound from the fan was noticibly different and it seems to work a bit better. I thought it was the new Lumberjack pellets that I tried, but now I am not sure. The firmware is only visible when you are running the grill. I will check mine later today but others are saying it is 1.2_1394. Mine had been 1.1_1372. This is different from the IOS software version (which is 0.94 (226))..
 
Interesting, I just checked mine and still 1.1 1372. No indication of a firmware update in the app either.
 
Yesterday when I started my WSF I noticed the controller display showing a series of blinking lights near the bottom and took a little longer to start up. I saw on other websites that this was a firmware update. The sound from the fan was noticibly different and it seems to work a bit better. I thought it was the new Lumberjack pellets that I tried, but now I am not sure. The firmware is only visible when you are running the grill. I will check mine later today but others are saying it is 1.2_1394. Mine had been 1.1_1372. This is different from the IOS software version (which is 0.94 (226))..
Mine did the same. The probe lights flashed on and off in order from left to right and progressively got faster. At first I was worried that my controller bit the dust but just waited and it eventually booted up.
 
Mine did the same. The probe lights flashed on and off in order from left to right and progressively got faster. At first I was worried that my controller bit the dust but just waited and it eventually booted up.

I just got my EX4 on Friday. I'm doing my first cook today. It did an update when I did my seasoning burn on Friday evening. I looked at the firmware just now and it is 1.2_1394. I'm not sure if it did a second when I powered it on today or if I got 1394 on Friday.

-Will
 
Received a softwaresponse update Friday for android. Supposed to improve WI first setup. I tried it it didn't work the first time so I tried it again and it hooked up. So I now have WiFi connection. Tried cooking por chops with the probe. They came out very good. First stage time bounced arouND a lot it must self adjust buy temp probe. Pretty slick.
 
Another little annoyance to me:

When you shut down the grill, it doesn't send that info to the app.

Instead, you just get an error message when the grill shuts down.
 
Yesterday when I started my WSF I noticed the controller display showing a series of blinking lights near the bottom and took a little longer to start up. I saw on other websites that this was a firmware update. The sound from the fan was noticibly different and it seems to work a bit better. I thought it was the new Lumberjack pellets that I tried, but now I am not sure. The firmware is only visible when you are running the grill. I will check mine later today but others are saying it is 1.2_1394. Mine had been 1.1_1372. This is different from the IOS software version (which is 0.94 (226))..

just checked and it is indeed 1.2_1394. The firmware is 04003 (found in the menu on the smokefire itself under "about")
 
just checked and it is indeed 1.2_1394. The firmware is 04003 (found in the menu on the smokefire itself under "about")
Went out and turned mine on and sure enough lights started flashing and I have the same 1394. I noticed the desplay now has temperature as well as home on the display. When you push the button the appear to be the same thing set the temp.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Back
Top